The XO-55 Horizon Manual Standing Wheelchair is the ideal chair for users 5'4" - 5'9" who are searching for a cost-effective alternative to a power-standing wheelchair.
Similar to our appraised XO-101 and XO-202, the XO-55 differs in that it allows one to manually stand, as well as manually propel the chair while in the seated position.
Utilizing the lightest and strongest aluminum in the world, as well as incorporating ergonomics into the design and frame structure, the standing wheelchair weighs in at a mere 57 pounds. For patients needing to stand for pressure relief, independence, blood circulation, improve digestion, strengthen bones, or unable to stand on their own, the XO-55 Horizon standing wheelchair will allow users to independently propel the wheelchair throughout daily activities, and manually stand when desired.
The standing wheelchair is equipped standard with all accessories needed for immediate use such as a chest harness, pelvic seat belt, and knee support. Scissor-style wheel locks, flip-up footplates, quick-release front caster forks, and wheels are all for the benefit of the consumer for easier transport when necessary. Our design factor goes beyond the armrest frame curving to allow for easier transferring, as well as crafting the utmost physical appeal in the manual standing wheelchair market.
Specifications:
HCPCS Code | Na |
Seat Width | 16 inch., 18 inch. |
Seat Depth | 18 inch.,19 inch., 20 inch. |
Armrest Height | 8 inch. |
Seat Height | 21 inch. |
Back Height | 11 inch. |
Overall Height | 32 inch. |
Overall Width | 29 inch. |
Overall Length | 40 inch. |
Product Weight | 55 lbs. (41 lbs Frame Weight) |
Weight Without Riggings | 34 lbs. |
Weight Capacity | 250 lbs |
Shipping Dimensions | 39″ L x 25″ H x 23 W |
Product Features:
- Only 55 lb. total weight with wheels (41 lb frame weight)
- Quick Release Caster Forks, and Rear Wheels
- 6061 T-6 Aircraft Grade Aluminum Frame
- Pure White Frame Color
- Transparent Lightweight Composite Side Panel
- High Strength Struts for Manual Standing
- Rear Strut Bar for Stability and Increased Nimbleness
- Easy-to-Use Standing Handle Allows for Manual Stand In as Little as 10 seconds
- Lightweight Frame Design
- Breathable Nylon Sling/Upholstery Seat and Back
- 24″ X 1″ High Profile Pneumatic Tires
- 6″x1 1/4″ Poly Foam Front Flat Free Casters
- Padded Flip-back Armrest
- Flip up Footplates
- Chest Strap, Pelvic Seatbelt, and Knee Strap are Standard
- Scissor Style Wheel Locks
Cura360 Return Policy
Most products featured on Cura360.com can be returned within 30 days of purchase depending upon the manufacturer’s return policy.
For specific return information or authorization, please contact Cura360's Customer Service Department at [email protected] or call 833-207-3433 for authorization. Returns cannot be processed without contacting Cura360 first, and some items are non-returnable when opened due to health risks.
Generally, you can expect a credit or refund, less a restocking and handling fee, in the same form of payment originally used for your purchase. Credits will be issued within 30 days of the manufacturer receiving your returned product back complete and in good, unused condition in original packaging, and them issuing Cura360 an approval. You will be refunded the purchase price, less the Restocking Fee & applicable shipping fees. You are responsible for the return label and shipping costs.
· Restocking Fees range based on the Manufacturers policies, typically between 20-30%
· All returns MUST be pre-approved by Cura360
· If a return is not received by the carrier within 15 days after the request has been approved, we will consider the item as not returned and a refund will not be processed
· Shipping costs are not reimbursable
· Returns due to damage or defect must be reported as soon as possible and pictures may be required
IMPORTANT If there is significant visible damage to the packaging upon receipt, request that the driver note the damage and request a claim be filed with the carrier for damage. You should also immediately contact Cura360 Customer Service at [email protected] or call 833-207-3433
Warranty
Please refer to the warranty card attached to each product for more information on policies and procedures. The warranty is extended only to the original purchase and delivery of the product. The warranty is not transferable. Parts or materials which are subjected to normal wear and tear which must be replaced/repaired are the owner’s responsibility. Damaged caused by user negligence, and accidental damages intentional are not covered under the Factory warranty. Arm pads and upholsteries are not covered by warranty. It is recommended that any claims under warranty be returned to the authorized dealer for the service through whom it was purchased from.
If Warranty Registration Card is not on file for the claim product, then a copy of the invoice with the date of purchase must be provided. The warranty period for the consumer commences on the purchase date of the seller. The warranty period for the seller, if the products are not to be sold to a consumer, commences on the invoice date from Karman. The warranty is void on wheelchairs that have had the serial # tag removed and/or altered.
Furthermore, products which have been subjected to negligence, abuse, improper storage, or handling, improper operation, any modifications, or misuse are not covered by the warranty.
All warranty repairs or replacements must have prior authorization from Karman with freight prepaid. Karman reserves the right to issue call tags for any warranty repairs, which is situation-dependent. Should a field action or recall occur, Karman will identify the affected units and contact your Karman dealer with instructions for resolution. Warranty registration is still advised. To ensure records are quickly retrieved with the corresponding customer and serial number for your medical equipment. Thank you for filling out this form. Please see the RMA policy for further details, rules, and restrictions.
Please refer to the warranty card attached to each product for more information on policies and procedures. The warranty is extended only to the original purchase and delivery of the product. The warranty is not transferable. Parts or materials which are subjected to normal wear and tear and must be replaced/repaired are the owner’s responsibility. Damages caused by user negligence, accidental damages intentional or not are covered under the Factory warranty. Arm pads and upholsteries are not covered by warranty. It is recommended that any claims under warranty be returned to the authorized dealer for service through whom it was purchased.
- local_shipping Free shipping, arrives by Thursday, November 28
- local_post_office Shipping options: 3-5 Days
Safe Checkout:
Specifications:
HCPCS Code | Na |
Seat Width | 16 inch., 18 inch. |
Seat Depth | 18 inch.,19 inch., 20 inch. |
Armrest Height | 8 inch. |
Seat Height | 21 inch. |
Back Height | 11 inch. |
Overall Height | 32 inch. |
Overall Width | 29 inch. |
Overall Length | 40 inch. |
Product Weight | 55 lbs. (41 lbs Frame Weight) |
Weight Without Riggings | 34 lbs. |
Weight Capacity | 250 lbs |
Shipping Dimensions | 39″ L x 25″ H x 23 W |
Product Features:
- Only 55 lb. total weight with wheels (41 lb frame weight)
- Quick Release Caster Forks, and Rear Wheels
- 6061 T-6 Aircraft Grade Aluminum Frame
- Pure White Frame Color
- Transparent Lightweight Composite Side Panel
- High Strength Struts for Manual Standing
- Rear Strut Bar for Stability and Increased Nimbleness
- Easy-to-Use Standing Handle Allows for Manual Stand In as Little as 10 seconds
- Lightweight Frame Design
- Breathable Nylon Sling/Upholstery Seat and Back
- 24″ X 1″ High Profile Pneumatic Tires
- 6″x1 1/4″ Poly Foam Front Flat Free Casters
- Padded Flip-back Armrest
- Flip up Footplates
- Chest Strap, Pelvic Seatbelt, and Knee Strap are Standard
- Scissor Style Wheel Locks
Cura360 Return Policy
Most products featured on Cura360.com can be returned within 30 days of purchase depending upon the manufacturer’s return policy.
For specific return information or authorization, please contact Cura360's Customer Service Department at [email protected] or call 833-207-3433 for authorization. Returns cannot be processed without contacting Cura360 first, and some items are non-returnable when opened due to health risks.
Generally, you can expect a credit or refund, less a restocking and handling fee, in the same form of payment originally used for your purchase. Credits will be issued within 30 days of the manufacturer receiving your returned product back complete and in good, unused condition in original packaging, and them issuing Cura360 an approval. You will be refunded the purchase price, less the Restocking Fee & applicable shipping fees. You are responsible for the return label and shipping costs.
· Restocking Fees range based on the Manufacturers policies, typically between 20-30%
· All returns MUST be pre-approved by Cura360
· If a return is not received by the carrier within 15 days after the request has been approved, we will consider the item as not returned and a refund will not be processed
· Shipping costs are not reimbursable
· Returns due to damage or defect must be reported as soon as possible and pictures may be required
IMPORTANT If there is significant visible damage to the packaging upon receipt, request that the driver note the damage and request a claim be filed with the carrier for damage. You should also immediately contact Cura360 Customer Service at [email protected] or call 833-207-3433
Warranty
Please refer to the warranty card attached to each product for more information on policies and procedures. The warranty is extended only to the original purchase and delivery of the product. The warranty is not transferable. Parts or materials which are subjected to normal wear and tear which must be replaced/repaired are the owner’s responsibility. Damaged caused by user negligence, and accidental damages intentional are not covered under the Factory warranty. Arm pads and upholsteries are not covered by warranty. It is recommended that any claims under warranty be returned to the authorized dealer for the service through whom it was purchased from.
If Warranty Registration Card is not on file for the claim product, then a copy of the invoice with the date of purchase must be provided. The warranty period for the consumer commences on the purchase date of the seller. The warranty period for the seller, if the products are not to be sold to a consumer, commences on the invoice date from Karman. The warranty is void on wheelchairs that have had the serial # tag removed and/or altered.
Furthermore, products which have been subjected to negligence, abuse, improper storage, or handling, improper operation, any modifications, or misuse are not covered by the warranty.
All warranty repairs or replacements must have prior authorization from Karman with freight prepaid. Karman reserves the right to issue call tags for any warranty repairs, which is situation-dependent. Should a field action or recall occur, Karman will identify the affected units and contact your Karman dealer with instructions for resolution. Warranty registration is still advised. To ensure records are quickly retrieved with the corresponding customer and serial number for your medical equipment. Thank you for filling out this form. Please see the RMA policy for further details, rules, and restrictions.
Please refer to the warranty card attached to each product for more information on policies and procedures. The warranty is extended only to the original purchase and delivery of the product. The warranty is not transferable. Parts or materials which are subjected to normal wear and tear and must be replaced/repaired are the owner’s responsibility. Damages caused by user negligence, accidental damages intentional or not are covered under the Factory warranty. Arm pads and upholsteries are not covered by warranty. It is recommended that any claims under warranty be returned to the authorized dealer for service through whom it was purchased.